Standard Terms and Conditions – U.S.A. and Canada

“JC” or “Johnson Controls” shall mean Johnson Controls Building Solutions, LLC for work performed in the U.S.A. and Johnson Controls Canada LP for work performed in Canada. These terms and conditions are an integral part of JC’s offer and form the basis of any agreement (the “Agreement” resulting from JC’s proposal for the goods and/or services described. By accepting this proposal, Purchaser agrees to be bound by the following terms and conditions:

(1) SCOPE OF WORK. This proposal is based upon the use of straight time labor only. JC and its subcontractors shall be provided access to the work site during regular business hours, or such other hours as may be requested by JC, including sufficient areas for staging, mobilization and storage. Plastering, patching and painting are excluded. “In-line” duct and piping devices, including, but not limited to, valves, dampers, humidifiers, wells, taps, flow meters, orifices, etc., if required hereunder to be furnished by JC, shall be distributed and installed by others under JC’s supervision but at no additional cost to JC. Purchaser agrees to provide JC with required field utilities (electricity, toilets, drinking water, project hoist, elevator service, etc.) without charge. JC agrees to keep the job site clean of debris arising out of its own operations. JC’s obligation is limited to the scope of work set forth in JC’s proposal and does not include any modifications to the work site under the Americans with Disabilities Act or any other law or building code(s). In no event shall JC be required to perform any work JC reasonably believes is outside the scope of work without a written change order signed by Purchaser and JC. In the performance of the work, if JC encounters conditions at the work site that are (i) subsurface or otherwise concealed physical conditions that differ materially from those indicated on drawings or (ii) unknown physical or pre-existing conditions of an unusual nature that differ materially from those ordinarily found to exist and generally recognized as inherent in construction activities of the type and character of the work, JC shall notify Purchaser of such conditions. If such conditions differ materially and cause an increase in JC’s costs of, or time required for, performance of any part of the work, JC shall be entitled to and Purchaser shall consent by change order to, an equitable adjustment of the contract price, contract time or both. Purchaser shall not charge any retention or back charge JC for any costs or expenses without JC’s written consent unless specifically noted in the statement of the scope of work or services undertaken by JC under this Agreement, JC’s obligations under this Agreement expressly exclude any work or service of any nature associated or connected with the identification, abatement, clean up, control, removal, or disposal of environmental hazards or dangerous substances, to include but not be limited to asbestos or PCSs, discovered in or on the premises. Any language or provision of the Agreement elsewhere contained which may authorize or empower the Purchaser to change, modify, or alter the scope of work or services to be performed by JC shall not operate to compel JC to perform any work relating to such hazards or substances without JC’s express written consent.

(2) DEPOSIT, INVOICING & PAYMENTS. Purchaser agrees to pay JC pursuant to the progress billing schedule of values set forth in JC’s proposal. If the schedule of values includes an upfront deposit, it will be paid within 30 days of contract signing and JC will not commence work until the upfront deposit is received. Customer agrees to pay for materials, goods, and equipment (ordered, delivered, or stored) pursuant to the schedule of values, prior to installation commencement. JC progress-based billing can also include services performed on-site or off-site. All invoices will be delivered via email, paid via ACH/EFT bank transfer and are due net 30 days from the date of invoice. ACH/EFT bank transfer details will be provided upon contract execution. The proposed total price is contingent on Purchaser agreeing to these payment and invoicing terms. Waivers of lien will be furnished upon request as the work progresses to the extent payments are received. Invoicing disputes must be identified in writing within 21 days of the date of invoice. Payments of any disputed amounts are due and payable upon resolution. All other undisputed amounts remain due within 30 days from the date of invoice. This Agreement is entered into with the understanding that the work or services to be provided by JC are not subject to any local, state, or federal prevailing wage statute. If it is later determined that local, state, or federal prevailing wage rates apply to JC’s work or services, JC reserves the right to issue a modification or change order to adjust the wage rates to the required prevailing wage rate. Purchaser agrees to pay for the applicable prevailing wage rates. In the event of Purchaser’s default, the balance of any outstanding amounts will be immediately due and payable. Payment is a condition precedent to JC’s obligation to perform under the Agreement. Purchaser acknowledges and agrees that timely payments of the full amounts listed on invoices is an essential term of this Agreement and that failure to make payment in full when due is a material breach of this Agreement. Purchaser further acknowledges that if there is any amount outstanding on an invoice, it is material to JC and will give JC, without prejudice to any other right or remedy, the right to, without notice: (i) suspend, discontinue or terminate performing any work and/or withhold further deliveries of equipment and other materials, terminate or suspend any unpaid software licenses, and/or suspend JC’s obligations under or terminate this Agreement; and (ii) charge Purchaser interest on the amounts unpaid at a rate equal to the lesser of one and one half (1.5) percent per month or the maximum rate permitted under applicable law, until payment is made in full; and iii) pay all of JC’s costs of collection, including (1) actual out of pocket expenses and (2) charge Purchaser a collection fee of twenty-five percent (25%) of the past due amount if collected through a collection agency or attorney and thirty-five percent (35%) if litigation is commenced to collect such past due amount. JC’s election to continue providing future services does not, in any way diminish JC’s right to terminate or suspend services or exercise any or all rights or remedies under this Agreement. JC shall not be liable for any damages, claims, expenses, or liabilities arising from or relating to suspension of services for non-payment. In the event that there are exigent circumstances requiring work or JC otherwise performs work or services at the premises following suspension, those services shall be governed by the terms of this Agreement unless a separate contract is executed. If Purchaser disputes any late payment notice or JC’s efforts to collect payment, Purchaser shall immediately notify JC in writing and explain the basis of the dispute. JC may increase prices upon notice to the Purchaser to reflect increases in material and labor costs. Prices may be adjusted by JC prior to shipment or installation to take into account increases in the cost of raw materials, component parts, third party products or labor rates or taxes; Trade Restrictions (as defined below); government actions; or to cover any unforeseen or other extra cost elements. “Trade Restrictions” means any additional or new tariff/duty, quota, tariff-rate quota, or cost associated with the withdrawal of tariff/duty concessions pursuant to a trade agreement(s). In the event JC is unable, after reasonable commercial efforts, to acquire and provide steel products, or products made from plastics or other commodities, if required to perform work required by this Agreement, Purchaser hereby agrees that JC may terminate the Agreement, or the relevant portion of the Agreement, at no additional cost and without penalty.  JC may terminate the work immediately upon notice to the Purchaser if JC, in its sole discretion, determines that the premises are unsafe to be accessed by JC's employees or subcontractors. 

(3) MATERIALS. If the materials or equipment included in this proposal become temporarily or permanently unavailable for reasons beyond the control and without the fault of JC, then in the case of such temporary unavailability, the time for performance of the work shall be extended to the extent thereof, and in the case of permanent unavailability, JC shall (a) be excused from furnishing said materials or equipment, and (b) be reimbursed for the difference between the cost of the materials or equipment permanently unavailable and the cost of a reasonably available substitute therefore. Orders for materials or equipment included may by cancelled or modified by Purchaser only with JC's express written consent. If cancellation or modification is allowed, Purchaser agrees to pay to JC all expenses incurred and damage sustained by JC on account of such cancellation or modification, plus a reasonable profit. At a minimum, Purchaser agrees to pay the following cancellation charges if JC consents to cancellation in writing of equipment manufactured by JC: For stock units, Purchaser will owe a restocking fee of ten percent (10%) of total sale price for such units. For custom units, cancelled by Purchaser after release to fabrication, cancellation charges shall be calculated according to the following formula: Cancellation charge = (X+ 0.1) x custom equipment sell price / Y, where X = number of weeks from date of release for fabrication to the date of Purchaser notice of cancellation and Y = number of weeks for delivery as offered at the time of the contract. JC shall also be entitled to recover for all on site labor performed up to cancellation, plus reasonable demobilization costs.

(4) LIMITED WARRANTY. JC warrants that the equipment manufactured by it shall be free from defects in material and workmanship arising from normal usage for a period of twelve (12) monthly from delivery of said equipment, or if installed by JC, for a period of twelve (12) months from installation, whichever occurs first. No warranty is provided for third-party products and equipment installed or furnished by JC. Such products and equipment are provided with the third-party manufacturer’s warranty to the extent available, and JC will transfer the benefits, together with all limitations, of that manufacturer’s warranty to Purchaser. For equipment installed by JC, if Purchaser provides written notice to JC of any such defect within thirty (30) days after the appearance or discovery of such defect, JC shall, at its option, repair or replace the defective equipment. All transportation charges incurred in connection with the warranty for equipment not installed by JC shall be borne by Purchaser. These warranties do not extend to any equipment which has been repaired by others, abused, altered or misused, or which has not been properly and reasonably maintained. THESE WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THOSE OF MERCHANTABILITY AND FITNESS FOR A SPECIFIC PURPOSE. JC makes no and specifically disclaims all representations or warranties that the services, products, software or third-party product or software will be secure from cyber threats, hacking or other similar malicious activity, or other similar malicious activity, or will detect the presence of, or eliminate, treat, or mitigate the spread transmission, or outbreak of any pathogen, disease, virus or other contagion, including but not limited to COVID 19.

(5) LIABILITY. To the maximum extent permitted by law, in no event shall JC and its affiliates and their respective personnel, suppliers and vendors (“JC Parties”) be liable to Purchaser or any third party under any cause of action or theory of liability even if advised of the possibility of such damages, for any: (a) special, incidental, indirect, punitive or consequential damages; (b) loss of business, use, profits, revenues, customer opportunities, anticipated savings or goodwill; (c) business interruption; or (d) data loss or other losses arising from viruses, ransomware, cyber-attacks or failures or interruptions to network systems arising in any manner from the equipment or material furnished or the work performed pursuant to this Agreement. In any case, the entire aggregate liability of the JC Parties under this Agreement for all damages, losses, causes of action, whether in contract, tort (including negligence), or otherwise, shall be limited to the amount actually received by JC for the performance of its obligations hereunder.

(6) TAXES/TARIFFS. Prices do not include taxes, fees, duties, tariffs, false alarm assessments, permits and levies or other charges imposed and/or enacted by a government, however designated or imposed (collectively, “Taxes”). All Taxes are the responsibility of Purchaser, unless Purchaser presents an exemption certificate acceptable to JC and the applicable taxing authorities. If JC is required to pay any such Taxes or other charges, Purchaser shall reimburse JC on demand. If any such exemption certificate is invalid, then Purchaser will immediately pay JC the amount of the Taxes, plus penalties and interest.

(7) SCHEDULE. JC and Purchaser shall mutually agree upon a schedule for completion of the work. In the event Purchaser desires to change or accelerate the schedule or the schedule is otherwise accelerated, delayed, or impacted for reasons beyond the control of JC, JC shall be entitled to a change order equitably adjusting the compensation of JC to account for the increased costs associated with such schedule changes.

(8) DELAYS. JC shall not be liable for any delay in the performance of the work resulting from or attributed to acts or circumstances beyond JC’s control, including, but not limited to Force Majeure Events, conditions of the premises, acts or omissions of the Purchaser, Owner or other contractors or delays caused by suppliers or subcontractors of JC.

(9) COMPLIANCE WITH LAWS. JC shall comply with all applicable federal, state and local laws and regulations and shall obtain all temporary licenses and permits required for the prosecution of the work. Licenses and permits of a permanent nature shall be procured and paid for by the Purchaser.

(10) DISPUTES. JC shall have the sole and exclusive right to determine whether any dispute, controversy or claim arising out of or relating to the Agreement, or the breach thereof, shall be submitted to a court of law or arbitrated. For Purchasers located in the United State, the laws of Delaware shall govern the validity, enforceability, and interpretation of this Agreement, without regard to conflicts of law principles thereof, and the exclusive venue for any such litigation or arbitration shall be in Milwaukee, Wisconsin. For Purchasers located in Canada, the laws of Ontario shall govern the validity, enforceability, and interpretation of this Agreement, without regard to conflicts of law principles thereof, and the exclusive venue for any such litigation or arbitration shall be in Ontario, Canada. The parties waive any objection to the exclusive jurisdiction of the specified forums, including any objection based on forum non conveniens. In the event the matter is submitted to a court, JC and Purchaser hereby agree to waive their right to trial by jury. In the event the matter is submitted to arbitration by JC, the costs of arbitration shall be borne equally by the parties, and the arbitrator’s award may be confirmed and reduced to judgment in any court of competent jurisdiction. Purchaser will pay all of JC’s reasonable collection costs (including legal fees and expenses) as provided in Section 2. Except as provided below, no claim or cause of action, whether known or unknown, shall be brought by either party against the other more than one year after the claim first arose. Claims not subject to the one-year limitation include claims by JC for unpaid: (1) contract amounts, (2) change order amounts (approved or requested) and (3) delays and/or work inefficiencies.

(11) INSURANCE. Insurance coverage in excess of JC’s standard limits will be furnished when requested and required. No credit will be given or premium paid by JC for insurance afforded by others.

(12) INDEMNITY. To the fullest extent permitted by law, JC and Purchaser shall indemnify each other from any and all claims, actions, costs, expenses, damages and liabilities, including reasonable attorneys’ fees, resulting from death or bodily injury or damage to real or tangible personal property, to the extent caused by the negligence or misconduct of their respective employees or other authorized agents in connection with their activities within the scope of this Agreement. Neither party shall indemnify the other against claims, actions, costs, expenses or liabilities to the extent attributable to the actions or omissions of the other party. If the parties are both at fault, the obligation to indemnify shall be proportional to their relative fault.

(13) PATENTS. JC shall defend or, at its own option settle, any action against Purchaser brought by a third party to the extent that the action is based upon a claim that the equipment provided under the Agreement infringes any U.S. patents or copyrights for Purchasers located in the United States or Canadian patents or copyrights, for Purchasers located in Canada, or misappropriates any trade secrets of a third party (“Claim”), provided that: (i) Purchaser gives JC prompt written notice of any such Claim, (ii) Purchaser gives JC full authority to defend or settle any such Claim, and (iii) Purchaser gives JC proper and full information and assistance, at JC’s expense (except for Purchaser’s employees’ time) to defend or settle any such Claim. JC will pay those costs and damages finally awarded against Purchaser in the action that are specifically attributable to the claim or those costs and damages agreed to in a monetary settlement of the action. THE FOREGOING IS IN LIEU OF ANY WARRANTIES OF NONINFRINGEMENT, WHICH ARE HEREBY DISCLAIMED. The foregoing obligation of JC does not apply with respect to products or equipment or portions or components thereof (a) not supplied by JC, (b) made in whole or in part in accordance with Purchaser or owner specifications, (c) which are modified after shipment or installation by JC, if the alleged infringement related to such modification, (d) combined with other products, processes or materials where the alleged infringement relates to such combination, (e) where Purchaser continues allegedly infringing activity after being notified thereof and/or after being informed of modifications that would have avoided the alleged infringement without significant loss of performance or functionality, or (f) where Purchaser’s use of the product or equipment is incident to an infringement not resulting primarily from the product or equipment; Purchaser will indemnify JC and its officers, directors, agents, and employees from all damages, settlements, attorneys’ fees and expenses related to a claim of infringement, misappropriation, defamation, violation of rights of publicity or privacy excluded from JC’s indemnity obligation herein.

(14) OCCUPATIONAL SAFETY AND HEALTH. The Parties hereto agree to notify each other immediately upon becoming aware of an inspection under, or any alleged violation of, the Occupational Safety and Health Act relating in any way to the project or project site.

(15) PURCHASER RESPONSIBILITIES. Purchaser is solely responsible for the establishment, operation, maintenance, access, security and other aspects of its computer network (“Network”) and shall supply JC secure Network access for providing its work or services. Products networked, connected to the internet, or otherwise connected to computers or other devices must be appropriately protected by Purchaser and/or end user against unauthorized access. Purchaser is responsible to take appropriate measures, including performing back-ups, to protect information, including without limit data, software, or files (collectively “Data”) prior to receiving the work, services or products.

(16) FORCE MAJEURE. JC shall not be liable, nor in breach or default of its obligations under this Agreement, for delays, interruption, failure to render services, or any other failure by JC to perform an obligation under this Agreement, where such delay, interruption or failure is caused, in whole or in part, directly or indirectly, by a Force Majeure Event. A “Force Majeure Event” is a condition or event that is beyond the reasonable control of JC, whether foreseeable or unforeseeable, including, without limitation, acts of God, severe weather (including but not limited to hurricanes, tornados, severe snowstorms or severe rainstorms), wildfires, floods, earthquakes, seismic disturbances, or other natural disasters, acts or omissions of any governmental authority (including change of any applicable law or regulation), epidemics, pandemics, disease, viruses, quarantines, or other public health risks and/or responses thereto, condemnation, strikes, lock-outs, labor disputes, an increase of 5% or more in tariffs or other excise taxes for materials to be used on the project, fires, explosions or other casualties, thefts, vandalism, civil disturbances, insurrection, mob violence, riots, war or other armed conflict (or the serious threat of same), acts of terrorism, electrical power outages, interruptions or degradations in telecommunications, computer, network, or electronic communications systems, data breach, cyber-attacks, ransomware, unavailability or shortage of parts, materials, supplies, or transportation, or any other cause or casualty beyond the reasonable control of JC. If JC’s performance of the work is delayed, impacted, or prevented by a Force Majeure Event or its continued effects, JC shall be excused from performance under the Agreement. Without limiting the generality of the foregoing, if JC is delayed in achieving one or more of the scheduled milestones set forth in the Agreement due to a Force Majeure Event, JC will be entitled to extend the relevant completion date by the amount of time that JC was delayed as a result of the Force Majeure Event, plus such additional time as may be reasonably necessary to overcome the effect of the delay. To the extent that the Force Majeure Event directly or indirectly increases JC’s cost to perform the services, Purchaser is obligated to reimburse JC for such increased costs, including, without limitation, costs incurred by JC for additional labor, inventory storage, expedited shipping fees, trailer and equipment rental fees, subcontractor fees or other costs and expenses incurred by JC in connection with the Force Majeure Event.

(17) FAR. In the United States, JC supplies “commercial items” within the meaning of the Federal Acquisition Regulations (FAR), 48 CFR Parts 1-53. As to any customer order for a U.S. Government contract, JC will comply only with those mandatory flow-downs for commercial item and commercial services subcontracts listed either at FAR 52.244-6, or 52.212-5(e)(1), as applicable.

(18) DIGITAL ENABLED SERVICES; DATA. If JC provides Digital Enabled Services under this Agreement, these Digital Enabled Services require the collection, transfer and ingestion of building, equipment, system time series, and other data to JC’s cloud-hosted software applications. Customer consents to and grants JC the right to collect, transfer, ingest and use such data to enable JC and its affiliates and agents to provide, maintain, protect, develop and improve the Digital Enabled Services and JC products and services. Customer acknowledges that, while Digital Enabled Services generally improve equipment performance and services, Digital Enabled Services do not prevent all potential malfunction, insure against all loss, or guarantee a certain level of performance. Customer shall be solely responsible for the establishment, operation, maintenance, access, security and other aspects of its computer network (“Network”), shall appropriately protect hardware and products connected to the Network and will supply JC secure Network access for providing its Digital Enabled Services. As used herein, "Digital Enabled Services" mean services provided hereunder that employ JC software and related equipment installed at Customer facilities and JC cloud-hosted software offerings and tools to improve, develop, and enable such services. Digital Enabled Service may include, but are not limited to, (a) remote servicing and inspection, (b) advanced equipment fault detection and diagnostics, and (c) data dashboarding and health reporting. If Customer accesses and uses Software that is used to provide the Digital Enabled Services, the Software Terms (defined below) will govern such access and use. Certain equipment sold hereunder includes by default JC’s Connected Equipment Services. Connected Equipment Services is a data-analytics and monitoring Software platform that uses a cellular or network connection to gather equipment performance data to assist JC in advising Purchaser on (and Purchaser in better understanding) such equipment’s health, performance or potential malfunction. If Purchaser’s equipment includes Connected Equipment Services, such services will be on by default and the remote connection will continue to connect to Purchaser’s Equipment through the full equipment lifecycle, unless Purchaser specifically requests in writing that JC disable the remote connection, or Purchaser discontinues or removes such remote connection.

(19) JC DIGITAL SOLUTIONS. Use, implementation, and deployment of the software and hosted software products (“Software”) offered under these terms shall be subject to, and governed by, JC’s standard terms for such Software and Software related professional services in effect from time to time at www.johnsoncontrols.com/techterms collectively, the “Software Terms”). Specifically, the JC General EULA set forth at www.johnsoncontrols.com/buildings/legal/digital/generaleula governs access to and use of software installed on Customer’s premises or systems and the JC Terms of Service set forth at www.johnsoncontrols.com/buildings/legal/digital/generaltos govern access to and use of hosted software products. The applicable Software Terms are incorporated herein by this reference. Other than the right to use the Software as set forth in the Software Terms, JC and its licensors reserve all right, title, and interest (including all intellectual property rights) in and to the Software and improvements to the Software. The Software that is licensed hereunder is licensed subject to the Software Terms and not sold. If there is a conflict between the other terms herein and the Software Terms, the Software Terms shall take precedence and govern with respect to rights and responsibilities relating to the Software, its implementation and deployment and any improvements thereto. Notwithstanding any other provisions of this Agreement, unless otherwise agreed, the following terms apply to Software that is provided to Customer on a subscription basis (i.e., a time limited license or use right), (each a “Software Subscription”): Each Software Subscription provided hereunder will commence on the date the initial credentials for the Software are made available (the “Subscription Start Date”) and will continue in effect until the expiration of the subscription term noted in the applicable statement of work, order or other applicable ordering document. At the expiration of the Software Subscription, such Software Subscription will automatically renew for consecutive one (1) year terms (each a “Renewal Subscription Term”), unless either party provides the other party with a notice of non-renewal at least ninety (90) days prior to the expiration of the then-current term. To the extent permitted by applicable law, Software Subscriptions purchases are non-cancelable, and the sums paid nonrefundable. Fees for Software Subscriptions shall be paid annually in advance, invoiced on the Subscription Start Date and each subsequent anniversary thereof. Customer shall pay all invoiced amounts within thirty calendar days after the date of invoice. Payments not made within such time period shall be subject to late charges as set forth in the Software Terms. Unless otherwise agreed by the parties in writing, the subscription fee for each Renewal Subscription Term will be priced at Johnson Controls’ then-applicable list price for that Software offering. Any use of Software that exceeds the scope, metrics or volume set forth in this Agreement and applicable SOW will be subject to additional fees based on the date such excess use began

(20) PRIVACY.
(a) JC as Processor. Where JC factually acts as Processor of Personal Data on behalf of Purchaser (as such terms are defined in the DPA) the terms at www.johnsoncontrols.com/dpa shall apply.
(b) JC as Controller. JC will collect, process and transfer certain personal data of Purchaser and its personnel related to the business relationship between it and Purchaser (for example names, email addresses, telephone numbers) as controller and in accordance with JC’s Privacy Notice at https://www.johnsoncontrols.com/privacy. Purchaser acknowledges JC’s Privacy Notice and strictly to the extent consent is mandatorily required under applicable law, Purchaser consents to such collection, processing and transfer. To the extent consent to such collection, processing and transfer by JC is mandatorily required from Purchaser’s personnel under applicable law, Purchaser warrants and represents that it has obtained such consent.

(21) ASSIGNMENT. This Agreement is not assignable by the Purchaser except upon written consent of JC first being obtained. JC shall have the right to assign this Agreement, in whole or in part, or to subcontract any of its obligations under this Agreement without notice to Purchaser.

(22) CHANGES. No change or modification of any of the terms and conditions stated herein shall be binding upon Johnson unless accepted by Johnson in writing.

(23) ENTIRE AGREEMENT. This proposal, upon acceptance, shall constitute the entire agreement between the parties and supersedes any prior representations or understandings.

T&C Version: 10/01/2025